Shanghai Bilang constant temperature shaking incubator instructions.

The constant temperature oscillation incubator is a biochemical instrument with a heating and cooling bi-directional temperature regulation system and a temperature controllable incubator and oscillator. It is a plant, biology, microbiology, genetics, virus, medicine, environmental protection, food, petroleum, Indispensable laboratory equipment for precision culture preparation in the scientific research, education and production departments of the chemical industry

Constant temperature shaking incubator instructions:

1. When the instrument is fixedly placed, the fixed machine foot underneath must be lowered to a flat ground to ensure smooth operation (the pulleys underneath are only for convenient handling, and the fixed feet should be lifted off the ground during transportation) . The environment should be clean and tidy, dry and ventilated. If the instrument is placed against a wall, the back of the wall should not be less than 30cm away from the wall to ensure smooth ventilation.

2. Before using the instrument, each control switch should be in non-working state, and the speed control knob should be placed in the minimum position.

3. Install the test bottle: In order to balance the performance of the instrument during oscillation and avoid large vibration, all the test bottles should be filled when bottling, and the culture solution of each bottle should be approximately equal. If the culture medium is insufficient, the test bottles can be placed symmetrically.

4. Turn on the external power supply, set the power switch to the "on" position, and the indicator light is on.

5. Select culture temperature:

1 Turn the temperature “Set-Measure” selector switch to “Settings”, adjust the temperature control knob, and display the desired set temperature digitally.

2 Turn the temperature “Set-Measure” selector switch to “Measure” and the digital display shows the actual temperature in the working chamber.

If the ambient temperature is lower than the set temperature, it will be heated (the red indicator light is on).

If the ambient temperature is higher than the set temperature, it will be cooled (the green indicator light is on).

3 Observe the working chamber - turn on the light switch.

6. Turn on the “Oscillation Switch”, the indicator light is on, slowly adjust the speed control knob and raise it to the required speed. (Used at medium speed in the speed range to extend the life of the instrument)

7. Before each stop, each control switch should be in non-working state, cut off the power.

8. Note:

1 Two sets of oscillator incubators whose oscillators are controlled by their respective “oscillation switch” and “speed control knob”.

2 Not applicable to the cultivation of articles containing volatile chemicals, low concentrations of explosive gases and low ignition gases, and toxic substances.

BILON brand, service attentively

Bath Sponge is a kind of body washing product which is maken by PU. It can massage your body. We can make different Seaweed Bath Sponge, Durable Bath Sponge or other material such as polyester, non-woven fabrics, plastic / wooden handle and etc. As a factory with near 10 decades experience, FENGRUN COMMODITY CO.,LTD is majored in consistantly providing its OEM & ODM service of designing & manufacturing various cleanse products in different styles and colors. 

Bath Sponge

Bath Sponge, Body Wash Sponge, Seaweed Bath Sponge, Durable Bath Sponge, Body Sponge, Seaweed Sponge

FengRun Commodity Co.,Ltd. , https://www.sponges.nl