Gas stove
The gas stove is among all kinds of stoves, the most commonly used, the most convenient, and the easiest to operate, and it is also more convenient to use and maintain.
Gas stoves use gas (GAS gas) and are stored in gas tanks.
Gas tanks are divided into long tanks and flat tanks, and their gas nozzle structures are different. Gas furnace conversion head can solve the problem that the gas furnace and gas tank are not matched.
GAS cylinders are disposable. The burning time is about 2~4 hours depending on the gas furnace power and combustion conditions. After using the empty cans, do not throw them in the wild.
Oil stove
The gas stove was introduced in the previous section. Although convenient, it costs more fuel. If your climbing experience is more mature and rich, you can try to use the oil stove to save money, and secondly, to enhance your ability to climb equipment.
According to the structure can be roughly divided into three major systems:
Cold type: The most important feature is that the fuel in the furnace body is pressurized and vaporized. In terms of design, it is a relatively advanced practice. When it is burned, it will not explode due to excessive pressure, and the fuel temperature in the pressurized bottle Will not rise, so the main body of the stove is the lower temperature. However, heat conduction is inevitable and it is still hot, but it is not too hot.
Heat type: The use of fuel to sublimate heat, generate pressure, vaporize the fuel (a bit like the siphon principle). The design is of an early design and the principle is simple, but there is a danger of over pressure and explosion, but hearsay of the explosion is rarely heard. The disadvantage is that the humidity of the fuel in the pressurised bottle will continue to rise until it is hot.
Cold thermal mixing: Combining the above two principles, this type of design usually has the same characteristics. The oil bottle is too large and needs to be pressurized. Otherwise, the fire is not strong and the furnace is hot.
Oil stoves use kerosene and white gasoline, but they cannot use advanced gasoline and unleaded gasoline.
If there is an impurity in the fuel, the combustion residue may clog the nozzle, and maintenance requires a certain amount of technology.
Alcohol stove
The advantage is that the stove and fuel are cheap and no maintenance is required. The disadvantages are bulky and low combustion efficiency.
Alcohol stoves use solid alcohol and must be carefully melted in summer (or at higher temperatures).
Shape: Heart
The gas stove is among all kinds of stoves, the most commonly used, the most convenient, and the easiest to operate, and it is also more convenient to use and maintain.
Gas stoves use gas (GAS gas) and are stored in gas tanks.
Gas tanks are divided into long tanks and flat tanks, and their gas nozzle structures are different. Gas furnace conversion head can solve the problem that the gas furnace and gas tank are not matched.
GAS cylinders are disposable. The burning time is about 2~4 hours depending on the gas furnace power and combustion conditions. After using the empty cans, do not throw them in the wild.
Oil stove
The gas stove was introduced in the previous section. Although convenient, it costs more fuel. If your climbing experience is more mature and rich, you can try to use the oil stove to save money, and secondly, to enhance your ability to climb equipment.
According to the structure can be roughly divided into three major systems:
Cold type: The most important feature is that the fuel in the furnace body is pressurized and vaporized. In terms of design, it is a relatively advanced practice. When it is burned, it will not explode due to excessive pressure, and the fuel temperature in the pressurized bottle Will not rise, so the main body of the stove is the lower temperature. However, heat conduction is inevitable and it is still hot, but it is not too hot.
Heat type: The use of fuel to sublimate heat, generate pressure, vaporize the fuel (a bit like the siphon principle). The design is of an early design and the principle is simple, but there is a danger of over pressure and explosion, but hearsay of the explosion is rarely heard. The disadvantage is that the humidity of the fuel in the pressurised bottle will continue to rise until it is hot.
Cold thermal mixing: Combining the above two principles, this type of design usually has the same characteristics. The oil bottle is too large and needs to be pressurized. Otherwise, the fire is not strong and the furnace is hot.
Oil stoves use kerosene and white gasoline, but they cannot use advanced gasoline and unleaded gasoline.
If there is an impurity in the fuel, the combustion residue may clog the nozzle, and maintenance requires a certain amount of technology.
Alcohol stove
The advantage is that the stove and fuel are cheap and no maintenance is required. The disadvantages are bulky and low combustion efficiency.
Alcohol stoves use solid alcohol and must be carefully melted in summer (or at higher temperatures).
Specifications
Gemstone Tree Of Life Earring(gemstone earring,gold plated earring)
Shape: Heart
Size: 25MM
OEM acceptable Lead & Nickel free
Natural Gemstone chip heart shape tree of life earring
Size: 25mm
We provide many different stone too.
High quality.lower price.fast delivery
Shape: Heart
Life Earring Gemstone Chip Woven Earring Natural Fashiont Gemstone Heart Shape Tree Of Life Earrin
JOYA GIFT CO.,LIMITED , http://www.joyagifts.com