The doorway is a must in our house. The size of the building is different now, so we need to design according to our own standards, but most of the family door sizes are similar, generally have a standard size. , the method of measuring the size of a standard door opening, what does? for standard door size is generally how much? then you Xiaobian together renovated home network to tell you about it.
First, the standard door hole size measurement method
1. The thickness of the door wall is at least 80mm. The strength of the door frame with a low and 80mm size is not very strong, and the support for the door is not strong enough. If it is less than 80mm, it is necessary to thicken the thickness of the wall to 80mm or more.
2. The thickness measurement of the door wall should also be measured in the upper, middle and lower parts. See if the thickness of the wall is the same. Also, see if the thickness of the wall on the left and right walls and the top of the door is the same. Maximum value, but the error must not exceed 5mm.
3. When there is a protruding beam above the door hole, the upper door line cannot be installed. It is also necessary to use a blockboard to make a fake wall of 50-60 mm height, the length of which is the same as the width of the door opening, and the depth is the same as the thickness of the door opening.
4. The thickness of the wall of the bathroom and kitchen door wall should pay particular attention to the thickness of the wall tile on the wall. Generally, the single-sided tiling is thickened by 25mm, and the two-sided tiling is thickened by 50mm. The specific situation is signed and confirmed by the designer and the customer and the decoration company. The final dimensions should include the thickness of the wall tiles. It is best to measure after the wall tiles are attached.
Second, the standard door hole size is generally
1. The door for people to pass, the height is generally not less than 2m, and the height should not exceed 2.4m. Otherwise, there is a sense of emptiness and the door leaf production needs to be specially strengthened. If shape, ventilation, and lighting are required, a waist window can be added to the door. The height is from 0.4m, but it should not be too high.
2. According to the regulations, the standard bedroom door width is 80 cm high and 200 cm high. I am talking about the size of the door. If you want to keep the door cover, you should leave 86 cm high and 230 cm high. So the size of the door opening is different, which is the size of most door holes.
3. The average residential door is 0.9~1m, the compartment door is 0.8~0.9m, the kitchen door is about 0.8m, and the bathroom door is 0.7~0.8m. Due to the consideration of modern furniture, the upper limit is taken now. The width of the door of a public building is generally 1m for a single door and 1.2 to 1.8m for a double door. The width of the door should be considered for the width of the door. The width of the door of the double or multi-door is 0.6~1.0m.
There are a lot of people who care about the design of the house. For example, the door hole we are talking about, then the standard door size measurement method and size are generally small. Through the introduction of the above small series, I think everyone knows about it. Then if you still want to know more about decoration, please continue to pay attention to the decoration home Internet cafe.
PCL is a kind of polymer with mechanical properties, shape memory and biodegradability. It is also a kind of biocompatible, absorbable and low-cost synthetic polymer. Our PCL are currently widely used in many fields, such as injected glaucoma drug, coatings, ophthalmic implant, Dermal Fillers, absorbable.
The CAS Registry number of Poly(L-lactic acid) PLLA is 24980-41-4.
It is white floccule.
We can provide Intrinsic viscosity from 0.30-2.25 dl/g, Mw from 6000-30000.
For each batch a certificate of analysis is provided, showing the analytical data determined in our quality control laboratory. Additional analytical data can be made upon request.
When stored in the original packaging at low temperatures (2-8°C), PDLGA keeps its initial properties for at least two years.
Rimless Industry Co., Ltd. (RIMLESS) is devoted to the global brand operating and integrating, sale and after-sale services of biomedical materials, high-end medical devices, regenerative aesthetic products,cosmetics and beauty tools.
Poly Ε-Caprolactone Pcl,Pcl Polycaprolactone Materials,Material Medical Grade Polycaprolactone Pcl,Pcl Polycaprolactone Microspheres
Rimless Industry Co.,Ltd. , https://www.rebornplla.com