Color printing business cards have many advantages. However, the general color printing of business cards and 5 boxes from the majority of India, and some small and medium enterprises because of large changes in personnel, business is not widely, and other reasons, resulting in each person can not print five boxes of color printing business cards, the specific typesetting is not much to say here, the following Talk about printing techniques.

Most of them use dilute ink to dilute the ink to print the copper plate paper. It is necessary to master the amount of the varnish, and the machine ink should not be too much. And it takes a long time to hone the technology, and it's not a day or two that can print something good. When the full-page overprint, because the ink is not fully diluted and other reasons, there are individual or individual words will be virtual, seriously affecting the appearance, resulting in serious customer dissatisfaction, the business will be yellow!

My method is to use a small amount of color printing business card overprinting, when a large number of times it is recommended to dilute the entire ink and then print.

The method I use is:

1. Add a little varnish, (2 drops) evenly smear on the roller, (less ink) open the machine (color printing dragon 800LN +) speed 5-8 turn about 30 seconds.

2. On the version, adjust the version, I generally overprint without the test paper, may I technical pass it, Oh, in a waste of three sheets of paper to find a good location.

3. Next, I use the hair dryer, the small one, the quality must pass, I use the Feike brand. In the layout adjustment, when the machine is rotating, first use the hair dryer to stand on the paper stopper vertically (tuyere down) Blow the blanket with strong wind for about 5 seconds. Note: When the full version is overprinted, it must be blown back and forth. One place can't be blown onto the PS version.

First blow strong winds back and forth for about 5 seconds. Be careful not to move the hand to the right or left, or you will blow the PS plate or clip it into the machine. (The novice can get the front of the hair dryer to make two gaps and hold it on the cardboard, which can effectively prevent the left and right Move) Pay attention to the position and make sure that the handle of the hair dryer can be comfortably held in the hand.

This method is to heat the blanket to dilute the ink, which works well. Can not always use strong wind to blow, the first 10 sheets of paper blowing on it, and later changed to weak wind blowing, blowing back and forth, such as only the name of the seal, you can blow a fixed place, but also pay attention to try not to blow for a long time In the middle, the hair dryer should be stopped for about 3 seconds without affecting the printing effect, otherwise it will affect the life of the blanket.

The same applies when the amount of printing is large, which can make the virtual characters darker, so that the counterparts can not see that they are overprinted.

feeding bottle

Baby feeding bottles are mainly made of PP, glass, PPSU and tritan material. PP bottles are suitable for most markets, the material is widely used in manufacturing food container and feeding bottles.

PPSU bottles are suitable for higher markets, the material is the top one in manufacturing bottles.

Glass & Tritian bottles are in the medium markets, different people have different interest.

Bottles are BPA Free, with straw, with handle, anti-flatulence, pass EN14350 test, with breast-like nipple. We insist to use high quality products to promise for our sincere customers. We are baby manufacturer in China, offer OEM & ODM, and more new bottles are coming soon, thank you for your waiting.

Kindly note that choose suitable bottles for your baby, different ages need different bottles and nipples.

Feeding Bottle

Feeding Bottle,Baby Feeding Bottle,Baby Feeder,Baby Milk Bottle

​Taizhou Howawa Baby Products Co., Ltd. , https://www.howawa.com