[ Chinese wardrobe network ] [Chinese wardrobe network ] wardrobe as one of the necessary furniture for people, it is very important to choose the right wardrobe. Due to its small footprint and generally large storage space, the four-door wardrobe can store a lot of clothes and add a lot of color to the whole house. This issue of China's wardrobe net large-capacity solid wood four-door wardrobe disassembly method detailed, to meet your strong hands-on ability.
The simple assembly drawing of the solid wood four-door wardrobe can be seen from the figure. The installation of the wardrobe is mainly divided into three main parts: the main layer, the low-end drawer assembly and the door hardware. The low-end drawer assembly Installation is the most complicated task between the three, and you need to be careful during the installation process to avoid damage to the accessories. In the installation of the drawer, the choice of the slide rail is the key, and the installation process must ensure the level of the slot line. Finally, the installation order from top to bottom is a relatively correct method. Next, Xiaobian will systematically introduce the installation method of the solid wood four-door wardrobe.
After receiving the parts of the manufacturer's series of wardrobes, separate the different parts and start the installation of the wardrobe.
Step 1: Give the bottom plate and the foot strip a three-in-one connector. When installing the three-in-one connector, the direction of the notch of the screw of the three-in-one connector must be upward, and then fixed with a tool. If the direction is wrong, the screw will not be fixed.
Step 2: Lock the short leg to the wardrobe foot.
Step 3: Lock the bottom plate with the foot bar. After aligning the hole position, tighten the screw.
Step 4: Put the moisture-proof nail on the bottom of the base, and the bottom plate is completed.
Step 5: Give the bottom plate and the partition a three-in-one connector.
Step 6: Fix the back plate and the middle back plate.
Step 7: Connect the side panels and the back panel to form a combined body.
Step 8: Install the combination of the side panel and the back panel.
AUTRENDS INTERNATIONAL LIMITED , https://www.petspetscare.com