What I have told you before is the test preparation work and the matters that must be paid attention to during the test of the compound salt spray test chamber. Now we will continue to introduce the test samples taken from the compound salt spray test chamber after the test. How to deal with it and the routine documentation of most trials need to consider several aspects. Requirements and matters before and after the test of compound salt spray test chamber
After the salt spray test: Carefully remove the test sample from the compound salt spray test chamber, gently rinse with running cold water (less than 35 ° C) or remove the salt deposit from the surface with a cleaning tool such as a sponge, and then immediately proceed 80 ~100 ° C, drying for about 30 minutes (can be clear if not dried, except for the tester), and timely check the corrosion level or other defects of the test sample.
Note: The general record of most tests needs to consider the following aspects:
1. The appearance of the test sample after the test;
2. Appearance after removing corrosion products;
3. The part, quantity and state of corrosion defects (pitting, cracks, bubbles, etc.);
4. The time elapsed before the corrosion or the beginning of corrosion.
[Ai Sihao Instrument] insists that quality is more important than life, pays close attention to quality, strictly controls quality, and strives to give customers perfect products, so that customers can use them with confidence.
We cover a full range of baby items, such as baby rattle, baby teether, baby musical ,baby squeaker,baby hammock, baby comfort towel,blanket, baby gym and so on. We have a very strong OEM&ODM designing team. Annually, we will design more than 200 new items for our customer to select. Customized design is welcomed.
Baby Penguin Toy,Baby Rattles,Animal Rattles,Rattle Rings
Ningbo Dikai Imp&Exp Co., Ltd , https://www.longkaitoys.com