How to install the printing press scientifically and reasonably and be familiar with the trial operation of the machine is an important part of improving the machine performance and service life.
First, a number of factors that should be taken into account when determining the installation position of a printer.
1. The characteristics of the printing machine operation and the requirements of the machine operating characteristics and requirements are the basis for determining the location of the printing machine.
In addition to taking into account its own volume, the space occupied by a printing press should fully take into account the space required for operations, as well as the active position of the paper holder, the placement of ink sheets and semi-finished products, and the activities required for overhaul of the machine. Space and so on. Under normal circumstances, if you need at least 60cm of space when operating, you should place the machine in an 80cm space. In areas requiring strabismus or bow-back operation, there should be at least 1m of space above the movable space. If ink is added to the ink pool, it can be placed at an interval of 80cm, and the space where the piled paper position and the delivery position need to work should be at least 1m above the room. All parts of the machine operation surface should have a space of at least 1m.
2. The printers that do not affect the same model when the adjacent machines are operated should be placed side by side and have the same floor area. Adjacent display must be neat and beautiful, but also better use of space. The spacing between adjacent machines, in addition to taking into account the space required for operation, should also consider that when one side performs equipment adjustments or repairs, it should not affect the normal operation of adjacent machines, in particular, the operational safety is not threatened. In reality, due to the excessive use of "space" in the initial stage of equipment installation, the space between adjacent devices only considers the normal operating space. As a result, a narrow space leads to another machine that is adjacent to the repair machine and has to temporarily stop. repair".
3, the location of the paper and semi-finished products piled up due to the different production performance of the printer, the print structure and product batches are also different. Equipment for printing color products sometimes needs to use paper holders to dry semi-finished products. Therefore, it is necessary to fully consider the drying cycle of drying and the racks of printing products, and occupy the space around the machine. Both of them need to print sleeves and overprint products at the same time. The machine platform, as far as possible not to be placed adjacent to the name of the two machines at the same time when the use of paper holders lack of space to affect the normal production.
4. Minimize "dead zones"
When installing a printer, consider minimizing the "dead zone" and increasing the space utilization of the site. The machine's operation surface and transmission surface space should not be equal, the drive surface generally does not stack paper and semi-finished products, the active space should be smaller than the operating surface, the space for transmission is left blank, lubrication, adjustment and repair of the required spacing is to avoid causing "dead space" waste Space is available.
The location method of the printers is also different due to different plant conditions, such as the area of ​​the plant and the placement of the machines, the number of units, and the different positions of the walls, columns, doors and windows.
Second, scientific and rational installation of printer stands is a guarantee of reliable operation of the equipment.
How a printer stand is mounted not only directly affects the quality of the product, but also affects the life of the device.
1, must, firmly press the base of the printer base.
If the foundation is not strong enough, even if horizontal adjustments have been carefully made when the machine is installed, after a certain period of operation, the basic level will also fluctuate due to oscillation damage. This will cause the machine to deflect and cause unstable operation. problem. Therefore, any printing machine with a weight of 1t or more must consider installing a foundation. Printers smaller than 1t do not need special consideration, but they cannot be placed arbitrarily. They must be placed in a flatter, firmer position. In addition to considering the weight of the printing press itself, Zakijiki must also take into account the dynamic load transmitted to the foundation when the machine is in operation and the level of softness and hardness of the shop floor. If the workshop is built on the field, the geology is soft, the foundation should be deeper, and the area should be appropriately expanded to prevent deformation under the stand. (to be continued)
First, a number of factors that should be taken into account when determining the installation position of a printer.
1. The characteristics of the printing machine operation and the requirements of the machine operating characteristics and requirements are the basis for determining the location of the printing machine.
In addition to taking into account its own volume, the space occupied by a printing press should fully take into account the space required for operations, as well as the active position of the paper holder, the placement of ink sheets and semi-finished products, and the activities required for overhaul of the machine. Space and so on. Under normal circumstances, if you need at least 60cm of space when operating, you should place the machine in an 80cm space. In areas requiring strabismus or bow-back operation, there should be at least 1m of space above the movable space. If ink is added to the ink pool, it can be placed at an interval of 80cm, and the space where the piled paper position and the delivery position need to work should be at least 1m above the room. All parts of the machine operation surface should have a space of at least 1m.
2. The printers that do not affect the same model when the adjacent machines are operated should be placed side by side and have the same floor area. Adjacent display must be neat and beautiful, but also better use of space. The spacing between adjacent machines, in addition to taking into account the space required for operation, should also consider that when one side performs equipment adjustments or repairs, it should not affect the normal operation of adjacent machines, in particular, the operational safety is not threatened. In reality, due to the excessive use of "space" in the initial stage of equipment installation, the space between adjacent devices only considers the normal operating space. As a result, a narrow space leads to another machine that is adjacent to the repair machine and has to temporarily stop. repair".
3, the location of the paper and semi-finished products piled up due to the different production performance of the printer, the print structure and product batches are also different. Equipment for printing color products sometimes needs to use paper holders to dry semi-finished products. Therefore, it is necessary to fully consider the drying cycle of drying and the racks of printing products, and occupy the space around the machine. Both of them need to print sleeves and overprint products at the same time. The machine platform, as far as possible not to be placed adjacent to the name of the two machines at the same time when the use of paper holders lack of space to affect the normal production.
4. Minimize "dead zones"
When installing a printer, consider minimizing the "dead zone" and increasing the space utilization of the site. The machine's operation surface and transmission surface space should not be equal, the drive surface generally does not stack paper and semi-finished products, the active space should be smaller than the operating surface, the space for transmission is left blank, lubrication, adjustment and repair of the required spacing is to avoid causing "dead space" waste Space is available.
The location method of the printers is also different due to different plant conditions, such as the area of ​​the plant and the placement of the machines, the number of units, and the different positions of the walls, columns, doors and windows.
Second, scientific and rational installation of printer stands is a guarantee of reliable operation of the equipment.
How a printer stand is mounted not only directly affects the quality of the product, but also affects the life of the device.
1, must, firmly press the base of the printer base.
If the foundation is not strong enough, even if horizontal adjustments have been carefully made when the machine is installed, after a certain period of operation, the basic level will also fluctuate due to oscillation damage. This will cause the machine to deflect and cause unstable operation. problem. Therefore, any printing machine with a weight of 1t or more must consider installing a foundation. Printers smaller than 1t do not need special consideration, but they cannot be placed arbitrarily. They must be placed in a flatter, firmer position. In addition to considering the weight of the printing press itself, Zakijiki must also take into account the dynamic load transmitted to the foundation when the machine is in operation and the level of softness and hardness of the shop floor. If the workshop is built on the field, the geology is soft, the foundation should be deeper, and the area should be appropriately expanded to prevent deformation under the stand. (to be continued)
Plush Donkey Keychain,Plush Husky Toy,Toy Camera Keychain,Soft Toy Keychains
Rbin Industry And Trade Co., Ltd. , http://www.shplushtoy.com